posted
my old hard drive crashed and i just up graded my computer , my old one ran windows 98 and the new on is windows xp and i have flexi 5.8 and and now it will not let me save job files.....what must i do to fix this
-------------------- Aaron Haynes Aaron's Signs & Windows Napa Ca aa4signs@sbcglobal.net ------------ Important Rule For Life: "Look out for number one... Don't step in number two" ------------ If your never the lead dog on the sled...the scenery never changes. Posts: 241 | From: Napa Ca. USA | Registered: Dec 1998
| IP: Logged |
posted
Windows XP has a feature called "emulation". It MIGHT allow you to run your sign program in the Windows 98 mode. Unfortunately, one of the problems with upgrading to a new operating system is that some older programs, drivers, etc. will not run properly.
Another thing to try is calling tech support, or is Flexi one of those programs that are no longer supported by techies? (Serious question )
Finally, you CAN revert back to Windows 98 if you feel comfortable doing so. I had installed Win 2000 on my laptop about 18 months ago but then discovered that it would screw up a particular printer driver I had to use so I reformatted and did some some other stuff that had to be done, like removing partitions and changing file systems. Basically I searched the Windows website and printed out the instructions and did it.
Thats all I can think of .
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
yes dave its been a real pain inn the neck!!! my adobe type manager is also out of date and a update is on it way for $30......and my dsl is also down and a update is also on its way and been working on a slow dial-up....i have been able to get downloaded updates for my printer scaner and ploter.......i can work but i cant save anything yet
-------------------- Aaron Haynes Aaron's Signs & Windows Napa Ca aa4signs@sbcglobal.net ------------ Important Rule For Life: "Look out for number one... Don't step in number two" ------------ If your never the lead dog on the sled...the scenery never changes. Posts: 241 | From: Napa Ca. USA | Registered: Dec 1998
| IP: Logged |
posted
Try changing the date on your system clock to year 2001. I know it sounds corny but I have the same problem for some reason with the new Adobe Illustrator. Changing the year fixed it immediately....just remember to switch it back to the current year after using your Flexi.
Like I said it's an oddball fix, but hey, if it works and gets you back up its worth a shot.
posted
Aaron, I run Vinyl Express Master, which is basicly the same as Flexi(It even shows up as Flexisign-Pro). When I went to XP back in Feb. I had the same problem and soon found the easiest way to fix it was to upgrade to the current version. It was a $200.00 upgrade but even though I am retired now I didn't want to sell my plotter and I didn't want to use it as a "paper weight" either. The main problem I have with doing this is that it is like learning a new program all over again, and not using it everyday, the learning curve is even steeper. I really liked my older version, I knew how do do everything I wanted to do, now I have to hunt and search just to do one little thing that used to be effortless. Hope this helps!!!! Troy
-------------------- Troy "Metalleg" Haas 626 Kingswood Dr Evansville,In 47715 Posts: 1100 | From: Evansville,Indiana, USA | Registered: Nov 1998
| IP: Logged |
posted
dont know where you got your computer....if you had it built you could have told them to install your copy of 98. if you bought it at electronic store(cc, best buy, office depot, staples,)they can do a wipe on the hard drive and install win98 without voiding your warrenty. i just reforatted a h/d for a guy yesterday...was XP HOME version. he wanted to go back to 98SE.....had no problems with it.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Now you know why I've been asking all the questions about the 4b-unlink board......I hope to have an 'old goat' computer and plotter sitting in the corner so when my new,expensive, fast, etc., system goes down....again....I'll just plot along. Bob'T'
-------------------- Bob Timmerman Sunshine Sign Co. Dryden, NY Posts: 70 | From: Dryden, New York | Registered: Nov 2001
| IP: Logged |
posted
Still no luck fixing my 5.8........ any other flexi users out there?...i have also have 6.5 but i dont care much for it and im having a hard time finding everything
-------------------- Aaron Haynes Aaron's Signs & Windows Napa Ca aa4signs@sbcglobal.net ------------ Important Rule For Life: "Look out for number one... Don't step in number two" ------------ If your never the lead dog on the sled...the scenery never changes. Posts: 241 | From: Napa Ca. USA | Registered: Dec 1998
| IP: Logged |
posted
you cant take it back where you bought it and have then install 98SE?????? this would be your simplest solution....do this now before you get more stuff on computer...
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
i just might go back to 98...i have the complete disk from my last computer...but shucks i spent a ton of time getting everything loaded and up and running..it was a real pain ALL of my drivers for printer, scanner,dsl,flash card reader and my adobe type mgr. had to be updated the only thing that ran just from the get-go was my 8 year old ioline classic 24 plotter. I am getting my old computer fixed with a new hard drive and then will have one for just sign jobs and the other for online that way i will never ever again go down because of a virus.....each has rewriteable cd-rom for saving and transfering outside work....but I feel i still need to get totaly up to speed on my flexi 6.5 even though i know my 5.8 like the back of my hand and like it much better. I only really got the 6.5 when it came out so i could import and export differnt types of files much better....something 5.8 was not good at one thing i love about the new computer its a 1.7ghz and with the new dsl software that i just got.....ITS SMOKING FAST ON THE INTERNET!
-------------------- Aaron Haynes Aaron's Signs & Windows Napa Ca aa4signs@sbcglobal.net ------------ Important Rule For Life: "Look out for number one... Don't step in number two" ------------ If your never the lead dog on the sled...the scenery never changes. Posts: 241 | From: Napa Ca. USA | Registered: Dec 1998
| IP: Logged |
posted
REMOVABLE HARD DRIVES..... in the new 1.7 machine!!!!!! leave all your stuff on the one with xp..buy a new 60-80 gig h/d($69-129) install win98SE on it.....then load at your leisure....with removable h/d's you can shut the computer down, pull out the XP h/d, stick in the 98h/d turn on the computer it has an auto bios and will fine the changed h/d and boot up with no problem(i just built a guy a 1.7 XP AMD chip, IWILL XP333 motherboard....DDR FAST RAM) and i know it has an auto bios...
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
get a dual boot type program that will allow you to boot into win 98 or XP or whatever else you could tink of.......
windows commander is one of many . there are a fe really great ones around
-------------------- Leaper of Tall buildings.. If you find my posts divisive or otherwise snarky please ignore them. If you do not know how then PM me about it and I will demonstrate. Posts: 5278 | From: Im a nowhere man | Registered: Jul 2001
| IP: Logged |
![[Smile]](smile.gif)
)
Printer-friendly view of this topic