posted
I sent this file to a transfer co. and they said that they couldn't see the little "H's" on the 4-H logos. They said that they could see the ones on one of the bottom ones but not the other four.
Can some of you guys open them (EPS files) and tell me what you see? Let me know if you can do it and I'll send you the file. Thanks Wayne
-------------------- Wayne Webb Webb Signworks Chipley, FL 850.638.9329 wayne@webbsignworks.com Posts: 7409 | From: Chipley,Florida,United States | Registered: Oct 1999
| IP: Logged |
posted
Sure Wayne...Send the file up here!! I'll see if I can see everything.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
Wayne, filters sometimes do different things depending on what program you are exporting from and what program you are importing into. If Dave can open it with Corel, then most programs should import it. Do you know what program your vendor is using? Vic G
-------------------- Victor Georgiou Danville, CA , USA Posts: 1746 | From: Danville, CA , USA | Registered: Dec 1998
| IP: Logged |
posted
Wayne, when viewed in "wireframe" all 3 logos contain H's in the clover leaves. In fill mode 2 of the 3 logos show solid black H's. I went to ungroup the selection, but it was not grouped. All 3 logos were a compound object (or "combined" objects)I released the compound & fixed it and sent it back.
Printer-friendly view of this topic