posted
Hi All.... been a while since I checked in here but looking for recommendations on an adhesive for polystyrene/sintra to itself. Normally I will attach it to walls with 2-way tape however I'm looking to laminate several layers without the space 2-way tape creates.
-------------------- Happy Signing...... Marty
M.F. (Marty) Happy Signmaker Since 1974 Happy Ad Sign & Design Regina SK, Canada S4N 5K4 306-789-9567 happyad@sasktel.net www.happyad.ca
Get Happy & Get Noticed! Posts: 774 | From: Regina, Saskatchewan, Canada | Registered: Jan 1999
| IP: Logged |
posted
Try the adhesive used for plumbing pvc pipes. It's 2 part (primer and adhesive). Experiment on some scraps. You've gotta be quick, but that's what we use. Use the clear primer not the purple primer in case you're sloppy.
-------------------- Bill Diaz Diaz Sign Art Pontiac IL www.diazsignart.com Posts: 2121 | From: Pontiac, IL | Registered: Dec 2001
| IP: Logged |
posted
f you have access to a good plumbing and electrical supply place, they may have the PVC glue available by the quart. Forget the little cotton dauber, just pour on a good bead on a edge of a surface. Take an old silk screen squeege and spread it where needed.
Drop your second panel, clamp and weight it, open doors and go home. Fumes from this stuff is what all the fuss in the Ohio train spill is about.
Printer-friendly view of this topic