Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6893 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
posted
I made mine also. 2x4s and a small roll of bailing wire from the local home depot. I drill small holes in the side bars about a half inch apart...all the way down the frame bar. Pull the wire tight as it will sag on use and help the grain image. Mine has lasted over 10 years so far.
-------------------- Gerald Barlow Artworx Turlock, CA
95380 artworx@bigvalley.net Posts: 253 | From: Turlock, CA 95380, USA | Registered: Dec 2002
| IP: Logged |
posted
I made mine too; a large one and a smaller one. Strung them with stainless steel MIG welding wire. But the person I'm posting for just wants to buy a used one I think.
-------------------- Wayne Webb Webb Signworks Chipley, FL 850.638.9329 wayne@webbsignworks.com Posts: 7418 | From: Chipley,Florida,United States | Registered: Oct 1999
| IP: Logged |
Printer-friendly view of this topic