I have an old Flexi pro 7 Version and went to do a pounce pattern on my summa s140 and it worked just fine but when converting it back to the cutter function it won't switch back.
I have reloaded the software as well as the drivers for the summa to no avail. Yes...it is on an older system but has worked fine in the past and no major changes have occurred since then to cause the current glitch.
Has anyone experienced this issue?
Thanks
-------------------- Robert Beverly Arlington, Texas Posts: 1033 | From: Arlington, Texas | Registered: Jan 2001
| IP: Logged |
posted
Gee, I have a SummaT450. Never used the Pounce Pattern thingy. I do know if I use the Pen Plot, it doesn't go back to cutting until I cut something. On my machine, on the 3 setting, that's for Pen Plot. When I go back to cutting, go to a different number, it will say pen plot, but I ignore it. Then it just starts cutting as usual. I too also use an old version of FlexiSign.
-------------------- Signs by Alicia Jennings (Mudflap Girl) Tacoma, WA Since 1987 Have Lipstick, will travel. Posts: 3876 | From: Tacoma, WA. U.S.A. | Registered: Dec 1999
| IP: Logged |
Printer-friendly view of this topic