posted
Hey everyone. I just had to buy a new computer to run a Graphtec plotter, so now I have to upgrade cutting software as well. I don't need a very expensive Flexi or anything, just need something simple that works with Corel Draw. I used to use Cocut, but what's out there nowadays?
-------------------- Felix Marcano PuertoRicoSigns.Com Luquillo, PR
Work hard, party like a tourist! Posts: 2274 | From: Luquillo, Puerto Rico, USA | Registered: Nov 2000
| IP: Logged |
posted
There was a corel add on by an Austrailian guy called Signarts- make sure the driver for your plotter is listed or it won't work for you.
-------------------- John Byrd Ball Ground, Georgia 770-735-6874 http://johnbyrddesign.com so happy I gotta sit on both my hands to keep from wavin' at everybody! Posts: 741 | From: Ball Ground, Georgia, USA | Registered: May 1999
| IP: Logged |
posted
Felix, I just went to Graphtec's website and it looks like they have Windows drivers for many of their cutters, even older cutters. And the drivers are good for Win 10 too. With a Windows driver you wouldn't need any other program, just cut directly from CorelDraw.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
Printer-friendly view of this topic