posted
I submitted a pdf file to Signs 365 for a 4' x 16' banner and the file size was only about 15 KB. The identical file in a high res jpg was around 63 MB. The first one I ordered came back and looked fine, but it still made me nervous sending such a small file. What is the discrepancy, or in other words, how dey do dat?
-------------------- www.signcreations.net Sonny Franks Lilburn, GA 770-923-9933 Posts: 4115 | From: Lilburn, GA USA | Registered: Feb 1999
| IP: Logged |
But did you send the PDF as a vector file...that would be a much smaller file size and obviouly perfect.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
-------------------- Jack Wills Studio Design Works 1465 E.Hidalgo Circle Nye Beach / Newport, OR Posts: 2914 | From: Rocklin, CA. USA | Registered: Dec 1998
| IP: Logged |
posted
the size of the file is dependant on how the code is written for that particular extension. you have the same thing with .wav files are way big, same song in .mp3 is less then 1/2 as big. .ai & eps can be huge, .tiffs are also. take an .eps into corel that is huge, save as a .cdr and its almost nothing.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
it is called file compression,....it's kind of like when they take a Styrofoam cup down in a deep sea submarine and end up with a cup the size of a child's toy tea cup. the jpg when open can be large but when you save it to a file it is compressed and the computer takes out all the extra space to make the file smaller,...for example
file is open and uncompressed,...
fileissavedandcompressed,...
jpg's by their nature consist of numbers designating a color for each pixel,for a whole row of pixels,,if all the pixels are the same color on that row the file format allows for a much smaller code to say use the one number for all 800 numbers in this row,instead of repeating a 16 digit number 800 times,...
[ March 26, 2013, 09:20 AM: Message edited by: Tim Barrow ]
-------------------- fly low...timi/NC is, Tim Barrow Barrow Art Signs Winston-Salem,NC Posts: 2224 | From: Winston-Salem,NC,USA | Registered: Nov 1998
| IP: Logged |
"...there are no limits when you aim for perfection..." Jonathan Livingston Seagull Posts: 7014 | From: Highgrove via Toowoomba, Queensland, Australia | Registered: Dec 2002
| IP: Logged |
posted
Whatever software you're using to make the PDF - Always check the settings to if it's changing the resolution and color mode on your bitmap. Check to see what it's doing to jpg quality as well... too low and you'll get those nasty jpg artifacts that look like pimples. Be safe.
posted
Sonny, PDF is all I use to order with from 365 and have never had any issues with colors or resolution whether it's a Vector or Raster. (Once you get Signlab's palette corrected to cmyk) I am still using Adobe Creative suite CS4 so Acrobat is installed as a printer so you just need to change a few settings in Acrobat.
Open up your acrobat properties from the printers management window. Click on Printing Preferences. on the drop box of default settings click on High Quality Print. Then click on Layout then Advance. I have my Print Quality set at 1200dpi ICM Method: ICM Disabled (I have Signlab set up to do all my color correcting) Scaling 100%
Then after that when I go to print a banner or whatever I just go to my layout/Advance/Paper Size/postscript custom page size and enter the page size to whatever size I am printing at full size. Print and order.. Once you have Acrobat set up it takes a whole 2 seconds anytime after that.
Printer-friendly view of this topic