posted
I have a job to do that involves sandblast etching a 5'x5' piece of tempered 3/8 glass. I have shot lots of glass, but its been a long time since I did tempered. The glass company will not ship the piece unless it is tempered. Any suggestions? I use 30 mesh sand "out in the open". Better media? Sources? Jer/Artworx
-------------------- Gerald Barlow Artworx Turlock, CA
95380 artworx@bigvalley.net Posts: 198 | From: Turlock, CA 95380, USA | Registered: Dec 2002
| IP: Logged |
posted
The glass company I deal with gets me the plate glass and AFTER I etch it, they send it out & have it tempered.
-------------------- Tony Vickio The World Famous Vickio Signs 3364 Rt.329 Watkins Glen, NY 14891 t30v@vickiosigns.com 607-535-6241 http://www.vickiosigns.com Posts: 1063 | From: Watkins Glen, New York | Registered: Sep 2001
| IP: Logged |
posted
Can't do that,Tony, because of the size. I suggested doing that first. Best I expect is doing light etching as opposed to the digging in I usually do.
-------------------- Gerald Barlow Artworx Turlock, CA
95380 artworx@bigvalley.net Posts: 198 | From: Turlock, CA 95380, USA | Registered: Dec 2002
| IP: Logged |
-------------------- Tony Vickio The World Famous Vickio Signs 3364 Rt.329 Watkins Glen, NY 14891 t30v@vickiosigns.com 607-535-6241 http://www.vickiosigns.com Posts: 1063 | From: Watkins Glen, New York | Registered: Sep 2001
| IP: Logged |
![[Smile]](smile.gif)
Printer-friendly view of this topic