posted
I'm looking for a high build paint or a resin to fill the voids left by sandblasting text in limestone as shown on the attached image (shown with the photo mask still applied). The intent is to end up with flush, brown lettering on the ocher colored stone.
We've achieved flush, gray lettering using Matthews high build primer and non-flush lettering of any color using paint, but most high build primers are not recommended for tinting a dark color.
I was wondering if some thin resin could be tinted and used to fill the voids.
[ April 11, 2011, 10:15 AM: Message edited by: Paul Luszcz ]
-------------------- Paul Luszcz Zebra Visuals 27 Water Street Plymouth, MA 02360 508 746-9200 paul@zebravisuals.com Posts: 483 | From: 27 Water Street, Plymouth, MA 02360 | Registered: Jul 2003
| IP: Logged |
Printer-friendly view of this topic