posted
I have to supply an aluminum sign approx 67" x 58 inches...I was hoping to use one piece instead of two as it will be right by a door at eye level (hightly visible). Does this type of board only come in 4 x 8 ft. sheets? Thanks in advance.
-------------------- Susan Banasky Source Signs Nanaimo, British Columbia sourcesigns@shaw.ca
When in need....go directly to the "Source"!
Proud Supporter of this "Knowledge Network"! Posts: 1323 | From: Nanaimo, B.C. Canada | Registered: Oct 1999
| IP: Logged |
""Good judgment comes from experience; and a lot of that comes from bad judgment" - Will Rogers Posts: 3485 | From: Beautiful Newaygo, Michigan | Registered: Mar 2003
| IP: Logged |
posted
Duncan posted a link to the material I was reffering to. (scroll down) I paid a little over $100 for a 5'x10'. I've been quite satisfied with it
[ July 14, 2010, 08:27 PM: Message edited by: Kelly Thorson ]
-------------------- “Did you ever stop to think, and forget to start again?” -Winnie the Pooh & A.A. Milne
Kelly Thorson Kel-T-Grafix 801 Main St. Holdfast, SK S0G 2H0 ktg@sasktel.net Posts: 5496 | From: Penzance, Saskatchewan | Registered: May 2002
| IP: Logged |
posted
5'x10' footers over at www.sunsupply.com. If ya wasn't so far, I'd bring you one over.
-------------------- Signs by Alicia Jennings (Mudflap Girl) Tacoma, WA Since 1987 Have Lipstick, will travel. Posts: 3814 | From: Tacoma, WA. U.S.A. | Registered: Dec 1999
| IP: Logged |
posted
I think Kel is referring to alcan's e-panel. It has a thinner aluminum face and is only suitable for flat applications. No scoring and bending or other bending application. e-panel
![[Smile]](smile.gif)
![[Cool]](cool.gif)
Printer-friendly view of this topic