posted
I know this is a dumb question, but does ANYONE have a Pass-thru blasting cabinet that they would like to sell? Know anybody that does?? I'm in Jacksonville, so I guess location is an issue, but let me know anyway.
-------------------- Kelly Chatham Kelly's Signs Inc. 5723 Morse Av. Jax., FL, 32244 Posts: 68 | From: Jacksonville, Fl. | Registered: Apr 2005
| IP: Logged |
posted
...I just need the "cabinet"..have the pressure blaster etc. New these are about $1400. but surely someone has one somewhere they are not using and would like to get out of there way?
-------------------- Kelly Chatham Kelly's Signs Inc. 5723 Morse Av. Jax., FL, 32244 Posts: 68 | From: Jacksonville, Fl. | Registered: Apr 2005
| IP: Logged |
posted
Kelly, If you cannot find one, fabricating one may be an option.
Here is one Joe Crumley built and is made with a steel frame, PVC Panels, Plex windows all removable,& the access is the catch all's used on the back of RV Campers and the side opens. I wont speak for Joe, but from what I know of him he would be helpful in any way needed. .
-------------------- Sam Staffan Mackinaw Art & Sign 721 S. Nokomis St. Mackinaw City, MI dstaffan@sbcglobal.net Posts: 1697 | From: Mackinaw City, MI | Registered: Mar 2004
| IP: Logged |
Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. — Charles Mingus Posts: 6724 | From: Mendocino, CA. USA | Registered: Nov 1998
| IP: Logged |
posted
Sam, THAT is AWESOME....I had actually thought it could be "built" some way. My problem is I need it "Yesterday" and don't know anyone here that can build it...but you have provided yet another option for me and am so grateful for your reply. Its funny how everyone is whining about no work, but when you offer a job they run? I probably have enough scraps and materials to build this, just need to find someone to weld a frame maybe? Im gonna see if I hear from anyone else and if not....try this myself. Last year, was commissioned to do a carved glass piece, and charged what the POT cost me, now I have to produce another pretty quick. For that first piece I built a make-shift blasting room, but found it to be a little hard to reclaim my CS., and nasty, Half way through I burned up my compressor and was lucky enough to have my friend Carl, from Carl's Signs in Starke Fl. let me finish the job with his Pass-thru cabinet & comp. THAT is definitely the way to go! Guess if worse comes to worse I could frame it with wood. I can handle a saw, and such myself. ......OH did I mention....also looking for a single man who wants to WORK as hard as me? ....I've already tried to build on of those, a couple of times, but...failed miserably. LOL
Rick...."Wish you were here"...or I was there! I did that THAT with my shear and break when I had to move and had no place to put them. didn't want to sell them....YET. Thanks Guys....you ALWAYS come through with answers for me.
-------------------- Kelly Chatham Kelly's Signs Inc. 5723 Morse Av. Jax., FL, 32244 Posts: 68 | From: Jacksonville, Fl. | Registered: Apr 2005
| IP: Logged |
posted
If you are building the cabinet - make it a true pass through by providing wheels both inside and outside to slide the project thru the cabinet. Also use brush weather stripping to keep dust inside the cabinet when the blasted project passes through.
The cabinet I built years ago also has a 4' light on the back side to shine through mirrors when blasting the rear sides.
Good Luck,
-------------------- Steve Carter {:{) a Touch of Glass 254 Lexington Mill Rd. Magnolia, DE, 19962 PH: 302-335-3170 Posts: 181 | From: Magnolia, De, USA - Center of the Universe | Registered: Jan 1999
| IP: Logged |
posted
I have one that sat in the corner for about a year after I bought it, got it hooked up and use it all the time for blasting stuff. Haven't put a sign through it yet though.
-------------------- Jake Lyman Lyman Signs 45 State Road Phillipston, MA 01331 Posts: 635 | From: Phillipston, MA | Registered: Sep 2002
| IP: Logged |
Printer-friendly view of this topic