posted October 26, 2009 06:56 PM
Greetings Letter"burgh" folks. blue reflective 3 " wide tape for VFD equipment needed, 40 ft.( blue scotchlite color-pepsi sorts tone ) got any source ? or leftover from a job ? thanks upfront Mark Z....the "rookie" of Southern Md.
-------------------- mark zilliox mark z signs 8425 pushaw station rd. owings md. 20736 301-855-5407 thezs@earthlink.net http://www.markzsigns.com Posts: 348 | From: maryland | Registered: May 2003
| IP: Logged |
posted October 26, 2009 10:00 PM
If it need to be 3M I typically buy from Trim USA they have a place in NC and PA... they also sell there own brand of reflective which is pretty good as long as its going on a fairly flat surface... Also gregory is a good 3M supplier most all the times have what you need in 3M Reflective. We go throw a good amount of this and in my opinion 3M is by far the best and worth it as far as application
-------------------- We get you noticed Henry Edmonds X-treme Signs & Graphics South Hill, VA xtremesigns@yahoo.com Posts: 142 | From: South Hill, Va. | Registered: Jun 2001
| IP: Logged |
posted October 27, 2009 09:42 AM
Hiya Mark, Where ya been hiding? Although I haven't bought from Trim yet, they seem like a good vendor to work with. However, I've also purchased material from Gregory1.com and Earlmich.com too. If nobody here has extra, check the above company's overstock. And one more thing, I would prefer to get striping tape with the premask already applied. It makes the job go smoother with less issues - especially if you install the stripes dry.
Havin' fun,
Checkers
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic