posted
finished this up at 4 am last nite. so hot here cant go out there in the day time. been workin on this for a while, gotr' dun.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Pretty cool Joe. Just not sure it would work with our radiant heater here in MIchigan.
-------------------- Bill Modzel Mod-Zel screen Printing Traverse city, MI modzel@sbcglobal.net Posts: 1357 | From: Traverse City, MI | Registered: Nov 1998
| IP: Logged |
posted
Good idea Joe. I made a similar unit like yours except it was my paint easel. Easily held a 4 x 8 MDO panel. After lettering I could pull it up out of the way to dry. And still had plenty of floor space to work on other dust free projects, ie, backcoating, priming. On the plus side, paint dries quickly up near the roof, winter or summer.
-------------------- Ron Costa Sign and Design 28 Ingerson Road Jefferson, NH 0358 Posts: 620 | From: New Hampshire | Registered: Oct 2002
| IP: Logged |
posted
this is my easel, to the left of the rack. it is folded down but can be set upon an angle. the small table in front of the paint is also on hinges, so it can be dropped flat to the wall.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
When I first saw this I thought that it was a great idea if one had the ceiling height. Today while looking at my 10' ceiling, I realized that this could work in any height situation. And to think that all these years, I have been stacking my stuff against the wall!
Thanks OP. By the way, what do you use to crank this thing up and down, is that a boat trailer winch I see on the wall?
-------------------- Curt Stenz Graphics 700 Squirrel Lane Marathon, WI 54448 Posts: 591 | From: Marathon, WI 54448 | Registered: Dec 1998
| IP: Logged |
posted
of course he did))))))))))))YA PUTZ!!!!! yes it is a boat trailer winch $17 at harbor freight. i have 1/4" nylon rope on it right now but will get 3/16" steel cable at a later time.
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic