posted
any body out there with several rolls of white or clear lam and they can't them apart or an employee does a big print on the wrong stuff? sick of cutting off the first foot of vinyl to get rid of tape residue? check out Doug Downey's rollwraps in the merchant section. He came up with a great solution to these problems, by a letterhead for letterheads
-------------------- Pete Payne Willowlake Design/Canadian Signcrafters Bayfield, ON
posted
hmmm... nice photos, but I wonder why there is no clue given for the method of closure? Does it clip closed, or is it sewn to a permenant loop & slides on? I see the adjustable unit, but I just wonder if there is a low profile clip on the back & if it leaves a dent in the material? For $3.95 ea, I think I could use some of those. Do you sell the Canadian Signcrafters branded ones Pete?
posted
Hey Doug it is a closed loop and you can tighten it up as the roll gets smaller. The wrap slips over the top and it is easy to use. I will post a new picture shortly. It sure cleans a big mess up! The only material that leaves a wrinkle is the ready2print banner material. We don't tighten them up as much on the ready2print and it is working better.
posted
Let's put it this way...it is much better than putting masking tape. We printed a 16'x8' billboard on over laminate thinking it was a roll of white vinyl, that is where they work great if you have some young employees!
Printer-friendly view of this topic