Oh, man...this is good! I accidentally called 800 706-0036 and I got a sex hotline to talk to some porn queens for $$.
LOL... I quick hung up and thought, "Um...is Laura operating some other business on the side?!" Then, I discovered I dialed 800 instead of 810 for the area code.
Whew!! That one really threw me....I'll call you up again with the right number shortly.
-------------------- Todd Gill Outside The Lines Potterville, MI Posts: 7792 | From: Potterville, MI | Registered: Dec 2001
| IP: Logged |
posted
Hiya Todd, If that price included cutting to size and delivery I would still say it was high. My regular source, which is about 2.5 hours away, would charge about $130 for a 4' x 8' - cut to size and include shipping.
Havin' fun,
Checkers
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
posted
Checkers and Brad - could you give me your sources names....and phone #'s if you have them handy? Thanks.
Also...the current sign blanks within the strip-mall sign appear to be .25" acrylic/plexiglass...and they fit into channels on at least the top and bottom horizontal supports for each individual sign.
Could I get away with .125" polycarbonate? They might be slightly "loose" in the channels of the framework, but I don't think they would crack like the picture below...each plastic panel is 23" X 84".
The sign i'm doing goes where the cracked one is in the picture - - both sides of the sign - lit in the middle.
![[Rolling On The Floor]](graemlins/rolf.gif)
![[Applause]](graemlins/applause.gif)
![[Bash]](graemlins/bash.gif)
Printer-friendly view of this topic