posted
I've seen it posted somewhere recently, a photo of a homemade blasting booth made from wood. It was a free standing unit with a compressor and pressure pot underneath the blasting chamber. I can't remember where I saw it, maybe here. If someone here could lead me in the right direction, I would appreciate it.
I intend to do some small pieces and would like to blast them indoors.
-------------------- Mike gatlinburg Sign Crafters Posts: 1051 | From: Gatlinburg, TN | Registered: Oct 2005
| IP: Logged |
posted
I don't know if you have the materials already but I thought about building one too. But, when I added the time and materials, I decided it would be just about as cheap to buy one. I don't know if you have one by your house but I bought mine at a place called Harbor Freight
ebay has some right now for $124.00 I don't know how much the shipping is. By the time you buy, wood, glass, hoses, gloves, fittings etc, you are there aleady.
[ December 01, 2008, 12:43 PM: Message edited by: Tony Ray Mattingly ]
posted
Hi Mike. There's a really good Step-By-Step instructional reference on how to build one of these units, by fellow Letterhead Bob Hines.
It's at:http://www.letterville.com/steps/hines/
Hope this helps you out.
-------------------- Ken Henry Henry & Henry Signs London, Ontario Canada (519) 439-1881 e-mail: kjmlhenry@rogers.com
Why do I get all those on-line offers to sell me Viagara, when the only thing hardening is my arteries ? Posts: 2684 | From: London,Ontario, Canada | Registered: Feb 1999
| IP: Logged |
posted
Hi Mike...Bob Hines did a step by step on making your own Sandblast Booth, it isn't made of wood but it might give you some ideas...here is the link http://www.letterville.com/steps/hines/
-------------------- Barb Shortreed 144 Hill St. E. Fergus, Ontario Posts: 2377 | From: Fergus, Ont. | Registered: Sep 2000
| IP: Logged |
posted
Thanks folks. I do have materials left over from cut drops and had planned to use them. Still looking for good ideas to incorporate into the design.
-------------------- Mike gatlinburg Sign Crafters Posts: 1051 | From: Gatlinburg, TN | Registered: Oct 2005
| IP: Logged |