posted
We are publishing a photograph of one of the latest jobs that we have constructed this week. Is a plan and an application made whole and from the outset by Panos my son who after sufficient training in ArtCam Pro and after many hours and many test samples in this program, tells me that now has well understood the philosophy of the program and now wants to build all the 3D Signs inscriptions with this program. With the help of the owner of Delcam Hellas, and making changes in the post processor program, now Gerber Sabre 408 works perfectly well and very quickly upon the 3D. Panos now has a dream to visit and to know from near the Dan Sawatsky who admires so much for the job. I think when we find the time from the job until the summer to succeed ..!
-------------------- Sam Staffan Mackinaw Art & Sign 721 S. Nokomis St. Mackinaw City, MI dstaffan@sbcglobal.net Posts: 1696 | From: Mackinaw City, MI | Registered: Mar 2004
| IP: Logged |
What is the finish on it? Was it all done with the same cutter and one toolpath, or were the prism letters & trident a different cutter?
-------------------- "Stewey" on chat
"...there are no limits when you aim for perfection..." Jonathan Livingston Seagull Posts: 7014 | From: Highgrove via Toowoomba, Queensland, Australia | Registered: Dec 2002
| IP: Logged |
posted
Thank you Sam and Ian. Ian all is done with same cutter and one toolpath. The sign have diameter 90cm. The finish is a new gold and coper color from Finland.
-------------------- Maker of fine signs and other creative stuff. Located at 109 N. Cumberland ave. Harlan, Ky. 40831 606-837-0242 Posts: 4172 | From: Ages-Brookside, Ky. Up the Holler... | Registered: Jul 1999
| IP: Logged |
posted
An absolute masterpiece!! I could just sit and look at that piece for hours.
-------------------- Ricky Jackson Signs Now 614 Russell Parkway Warner Robins, GA (478) 923-7722 signpimp50@hotmail.com
"If I have seen further it is by standing on the shoulders of giants." Sir Issac Newton Posts: 3528 | From: Warner Robins, GA | Registered: Oct 2004
| IP: Logged |
posted
I love the background textures. The piece is very sophisticated and yet fun. The play between the smooth graphics and the textured background works great and the simple but rich colours set it off perfectly. How long did it take to set up the file and how long for the machine to carve it?
-------------------- “Did you ever stop to think, and forget to start again?” -Winnie the Pooh & A.A. Milne
Kelly Thorson Kel-T-Grafix 801 Main St. Holdfast, SK S0G 2H0 ktg@sasktel.net Posts: 5496 | From: Penzance, Saskatchewan | Registered: May 2002
| IP: Logged |
posted
Did you notice the new play on wiggly lines? This is one serious contender!
-------------------- “Did you ever stop to think, and forget to start again?” -Winnie the Pooh & A.A. Milne
Kelly Thorson Kel-T-Grafix 801 Main St. Holdfast, SK S0G 2H0 ktg@sasktel.net Posts: 5496 | From: Penzance, Saskatchewan | Registered: May 2002
| IP: Logged |
posted
Thanks to all for the good words... The material is HDU , the time to finish a design and the setup is 3 hours and the time to machine is 7 1/2 hours.. My son Panos is 20 years old but work in my shop part time from 14 yars ols and full time 2 years now. Thanks Periandros & Panos Damoulis
posted
This is one awesome piece Periandros & Panos!!! And this is the type of work routers can produce effortlessly.
May Router Wars echo the world over... because the sign industry will be the better for it!!!
-grampa dan
-------------------- Dan Sawatzky Imagination Corporation Yarrow, British Columbia dan@imaginationcorporation.com http://www.imaginationcorporation.com
Being a grampa is one of the the most wonderful things in the world!!! Posts: 8738 | From: Yarrow, B.C. Canada | Registered: Nov 1998
| IP: Logged |
posted
Thank you all for your good words and comments. In the next few days will photograph all the pieces of the pilot we built over the course of learning and testing ArtCam for your feedback. This area has exceptional people here, and artists. Thank you very much. Periandros & Panos Damoulis
![[Cool]](cool.gif)
![[Applause]](graemlins/applause.gif)
![[Wink]](wink.gif)
Printer-friendly view of this topic