posted
I normally extend my laminate about 3/8" past the edge of my printed graphic for partial and vehicle graphics. I was told a long time ago that this would keep the graphic edges cleaner. Is this what the rest of you guys do.
Of course it does not matter which way you do it if the edge seal is not a good seal and the adhesive is not bonded enough.
Interested in what your thoughts are.
-------------------- Bob Noyes Digital Graffiti 310 Main St NE Mapleton, MN 56065 Posts: 130 | From: Mapleton, MN | Registered: Nov 2007
| IP: Logged |
posted
Nope. We never have and have never had a problem with edge delamination.
P
-------------------- Pierre St.Marie Stmariegraphics Kalispell,Mt www.stmariegraphics.com ------------------ Plan on knowing everything before I die and time's running out! Posts: 4223 | From: Kalispell,Mt 59903 | Registered: Mar 2000
| IP: Logged |
posted
Hiya Bob, When doing full wraps, I'll overlap graphics 1/4". If it's a partial, I don't bother with a clear overlap from the graphic to the vehicle. The most I would normally do is edge seal the graphics with a Sealit! pen.
Havin' fun,
Checkers
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
posted
Thanks for the info, I think I'll save some time from now on.
-------------------- Bob Noyes Digital Graffiti 310 Main St NE Mapleton, MN 56065 Posts: 130 | From: Mapleton, MN | Registered: Nov 2007
| IP: Logged |
Printer-friendly view of this topic