posted
What length? Fully covered? How much detail? I'd be drawing a rectangle, & putting two circles under the back end, if that was good enough... edited to add, I don't have any semi trailer clip art, but another option would be to take clip art of a body truck, and chop off the cabin, leaving the tray/deck, pantech, and back wheels.
[ October 07, 2007, 08:19 AM: Message edited by: Ian Stewart-Koster ]
-------------------- "Stewey" on chat
"...there are no limits when you aim for perfection..." Jonathan Livingston Seagull Posts: 7014 | From: Highgrove via Toowoomba, Queensland, Australia | Registered: Dec 2002
| IP: Logged |
posted
Better yet....go take a picture of that trailer, both sides and the back. Take a couple of measurementsd, and you will have anb exact template for your design.
You don't need a real expensive digicam for this, anything above 2 megapixel is good enough.
Customer will also see and exact rendition of his trailer, rather than a mock up!
-------------------- Si Allen #562 La Mirada, CA. USA
(714) 521-4810
si.allen on Skype
siallen@dslextreme.com
"SignPainters do It with Longer Strokes!"
Never mess with your profile while in a drunken stupor!!!
Brushasaurus on Chat Posts: 8827 | From: La Mirada, CA, USA | Registered: Nov 1998
| IP: Logged |
tHANKS IAN and Si this is what I am trying to do I want to replace the semi with a better drawing than the one on the card and at the same angle. I am looking to put a photo in there but would prefer a vector image at this stage.
-------------------- Mark Stokes Mark Stokes Signs Mount Barker South Australia Posts: 388 | From: Mount Barker | Registered: Jan 2005
| IP: Logged |
posted
Hi Stoksy, seems VERY close to the AllTrans logo to me? Two Adelaide trucking firms with very simular logos would be sad. I always try to do very individual logos for each company let alone same professions. give em something new and fresh..
cheers Rod
-------------------- Rod from, EAST COAST AIRBRUSHING "Airbrush Art & Graphics" Nambour; Sunshine Coast, Queensland. Australia E.mail: rod@rodticklesigns.com Web: www.rodticklesigns.com Posts: 635 | From: Nambour, Sunshine Coast, Queensland | Registered: Dec 1998
| IP: Logged |
posted
Thanks Rod did not know that. This logo(cda) is something I did 10 years ago I did not even see the all transport industries logo so it was not copied or anything what do I do?. The Cda company is a nationally accredited pilot for oversize,overmass vehicle and loads basicaly the lead car in front of a big truck, so the type of business is different.
[ October 07, 2007, 08:44 PM: Message edited by: Mark Stokes ]
-------------------- Mark Stokes Mark Stokes Signs Mount Barker South Australia Posts: 388 | From: Mount Barker | Registered: Jan 2005
| IP: Logged |
Printer-friendly view of this topic