posted
I think i've seen this asked before... inflatable - 10'-7" made by Novirana...in Florida. It's kept inflated and runs with small outboard, goes on a bigger boat.
The material is HYPOLON. I've got Ronan waterbased vinyl paint and some DEKA, has anybody used these? results?
Thanks, John
-------------------- John Lennig / Big Top Sign Arts 5668 Ewart Street, Burnaby, British Columbia, Canada bigtopya@hotmail.com 604.451.0006 Posts: 2184 | From: Burnaby, British Columbia,Canada | Registered: Nov 2001
| IP: Logged |
posted
Greato Mike! I'm gonna use both paints, one on each side!
...It's still in R&R, calling it Green-Shot!
BTJ
-------------------- John Lennig / Big Top Sign Arts 5668 Ewart Street, Burnaby, British Columbia, Canada bigtopya@hotmail.com 604.451.0006 Posts: 2184 | From: Burnaby, British Columbia,Canada | Registered: Nov 2001
| IP: Logged |
posted
Magic One water based lettering enamel sold by Canadian Signcrafters is the best replacement for the old DEKA, flows better and covers better also (not the red), it would be a good bet as I used it on vynil seats and banners without problems.
I just painted white wall on my car tires with 4 different kind of paint and the most resistant was Magic One.
But on a boat I would probably go with vynil screen printing ink with lacquer thinner.
Just let us know!
-------------------- Pierre Tardif P. Tardif Inc. 1006 boul. PIE-XI sud Val-Belair QC. Canada G3K 1L2 418-847-4089 pierre@ptardif.com Posts: 800 | From: Quebec city | Registered: Aug 2002
| IP: Logged |
TI-COTE CLEAR PRIMER/BARRIER COAT (433) TI-COTE CLEAR PRIMER BARRIER COAT is a high-performance, water-based, clear primer/barrier coating developed for use on vinyl substrates, such as flexible faces, awnings, banners and self-adhesive vinyls, to allow the use of enamel topcoats and lettering enamels.
-------------------- Gene Golden Gettysburg Signs Gettysburg PA 17325 717-334-0200 genegolden@gettysburgsigns.com
"Art is knowing when to stop." Posts: 1578 | From: Gettysburg, PA | Registered: Jun 2003
| IP: Logged |
posted
I cut vinyl stencils for a local Zodaic dealer and he sprays them with automotive paint for restoring vinyl car tops. I don't know if it's available in non-spray cans though.
-------------------- Bill Modzel Mod-Zel screen Printing Traverse city, MI modzel@sbcglobal.net Posts: 1357 | From: Traverse City, MI | Registered: Nov 1998
| IP: Logged |
posted
David, I talked him into runing thru my MultiBam! router... am now pricing New inflatables!
thanks, everybody, for the tips. I wrote them down, in case i can pick up some of these products later. I lettered it with Ronan Auqacoat and DEKA..even mixed them for a colour!
John
-------------------- John Lennig / Big Top Sign Arts 5668 Ewart Street, Burnaby, British Columbia, Canada bigtopya@hotmail.com 604.451.0006 Posts: 2184 | From: Burnaby, British Columbia,Canada | Registered: Nov 2001
| IP: Logged |
![[Eek!]](eek.gif)
![[Bash]](graemlins/bash.gif)
Printer-friendly view of this topic