posted
I have Coral 9 and win98.... Plotter is one of those little $800 plotters that runs off of Flexi basic. I understand the plotter uses the same driver as the Roland GX24. I want to cut direct from Corel 9. Roland has a plug in program but it is for Corel 10-up and it won't load..........
Can someone send me a driver or tell me what to do?
-------------------- Jim Watkins Classic Signs Kellyville, Ok Posts: 29 | From: Kellyville, Ok. USA | Registered: Aug 2000
| IP: Logged |
posted
Jim..You could try loading the driver for the CM or CX 24. They will work with Corel 9.
If it must be the Sign Studio plug-in for the GX 24 then just upgrade to CorelDraw X3. Cheap solution and a VERY worthwhile investment.
Edited to say...Sorry, version 12 or X3 won't work with Windows 98.
Sounds like you need to be upgrading a bit.
[ June 15, 2007, 06:39 PM: Message edited by: Dave Grundy ]
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
Printer-friendly view of this topic