posted
Since Mass Mayhem I've been determined to practice lettering and stripeing. I hand paint for sale signs, and add a little pinstripe design to it. I pinstripe on glass and wipe it off to do it again.
For now I ether pounce or use carbon paper to trace the designs onto what ever I'm doing. With the glass I just put the design under and trace.
Can anyone suggest some easy-er fonts that I can learn, so as to learn to paint free hand? Are there other suggestions you can make to help me develop my skills? Any help would be appreciated!
posted
...It's great that you want to (invest the time and effort to) learn hand lettering! Practice (using a simple letterstyle like Helvetica) making perfect verticle and horizontal strokes w. clean square corners (using tape and not). And curved strokes (like on S's and O's). Thin your paint alot so it flows down in one stroke.
...Remember, for whatever style you are lettering, consistency is more important than speed. Have fun!!!
posted
Hi Dana, you could learn a lot by finding something like brush script and practice on that. Turn/twist the brush hairs into the outside of the curves. This will keep the hairs tight together and produce a sharp line. Be sure to use the Helvetica also. Use all of the brush, not just the tip, lay the brush/press it into the body of the letter so you see how wide of a stroke you have and be bold. Perhaps you have a piece of dowl laying around, a couple feet long. If so then wrap some fabric, leather, or apply rubber to the end. You can rest your hand and learn lots of techniques with a mahl stick. Have fun!
-------------------- Michael Heaton Brushworks Yelm, Washington 360-339-0914 Posts: 14 | From: Yelm, Washington | Registered: Jun 2007
| IP: Logged |
posted
WHERES JOEY?????????????????he has a web site dedicated to pin-striping.......and if your serious he is willing to help ya....
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Those are good ideas . I do have a mahl stick, and I found some fonts on my cut program that lend them selves to easy brush strokes. I also found a book I bought about 15 years ago on lettering called, Sign Design Easy Type Guide, by Don Dewsnap. He's not a letterhead is he?
posted
Gotta get the Book by Mike Steven's Mastering Layout. In it, it has a bunch of fonts that are extremely brush friendly. And never stop prcticing. Learning to hand letter/pinstripe is like learning to play a musical instrament. I hear that Slash still practices several hours every day.
-------------------- Signs by Alicia Jennings (Mudflap Girl) Tacoma, WA Since 1987 Have Lipstick, will travel. Posts: 3845 | From: Tacoma, WA. U.S.A. | Registered: Dec 1999
| IP: Logged |
In addition to the books already mentioned, there are a couple available from signcraft.com, namely The Alphabet Book and 65 Casual Alphabets. Both have many relatively easy alphabets, some of which are a little different and add variety.
As far as pinstriping, a good way to practice is to fold a piece of paper in half vertically, draw an idea for half a design on the paper from the fold outward. Then pounce it, unfold it, and you will have a symmetrical design to work from. Do it like that; then try one alongside it without the pattern.
There's nothing wrong with using pounce patterns to do striping, but if you're really serious, the development of "the eye" is very important. Freehand striping is very impromptu and adaptable to a variety of situations. Pounce pattern striping is more planned; but you can vary a line or curve as needed (vary from the pattern)if you feel something else will work better.
Keep practicing and keep having fun!!
-------------------- Dale Feicke Grafix 714 East St. Mendenhall, MS 39114
"I can do all things through Christ, who strengthens me." Posts: 2963 | From: Mendenhall, MS | Registered: Apr 1999
| IP: Logged |
posted
Casuals are the easiest letterstyle to render when starting out.
As far as a practicing surface, get a prefinished aluminum blank. More of a pain to clean but it will be the same surface as you will be lettering and striping on. One of the keys to mastering lettering and especially striping is learning the correct "pull". Glass, paper and a finished painted surface have far different pulls to them.
-------------------- George Perkins Millington,TN. goatwell@bigriver.net
"I started out with nothing and still have most of it left"
posted
Dana from what I saw at Mass mayhem, you have the determination and poise to be a good pinstriper. Annd you got the brushes and a cool kit to keep em in, so now you need... technique, practice and cofidence. keep practicing, get those basic strokes down pat, to the left, to the right, backwards, forwards, sidways, learn those strokes, dont try to reinvent them yet. once you get those strokes down so you can pull them consistently, then start working on symetry. You got the most iortant thing already, drive and determination.
-------------------- Ken McTague, Concept Signs 57 Bridge St. (route 107) Salem MA 01970 1-978-745-5800 conceptsign@yahoo.com http://www.pinheadlounge.com/CaptainKen
---------------------------------
"A wise man once said that, or was it a wise guy?" Posts: 2425 | From: Salem, MA | Registered: Apr 1999
| IP: Logged |
posted
If you are really seriously interested call me like you said you would. I'll be more than happy to share with you my knowledge of striping and lettering. Never do want to see the art die!
I'm just around the cornor, fifteen minutes away. My number is on the web site.
-------------------- Len Mort Signmaker1.com 11 Juniper Drive Millbury, MA 508-865-2382 "A Good Business Sign, is A Sign of Good Business"(1957) Posts: 811 | From: Millbury, Ma | Registered: Dec 2006
| IP: Logged |
Printer-friendly view of this topic