To embed a watermark 1. Click Bitmaps Plug-ins Digimarc Embed watermark.
2. In the Copyright year(s) box, type a year or years.
3. In the Image attributes area, enable the check boxes for the applicable attributes.
4. Choose an option from the Target output list box.
5. Type a value in the Watermark durability box.
Higher values increase the persistence of the watermark under common image modifications such as dithering, cropping, compression, and scaling.
If you want to confirm the information available to viewers when they detect the watermark, enable the Verify check box.
• In the Copyright year(s) box, you cannot type a year before 1922 or after the current year. Separate the years with commas.
• In the Target output box, the Monitor and Web controls require a setting of less than 200 per inch (dpi), and the Printer control requires a setting of 300 dpi or higher.
• Combine all objects with the background before adding a watermark. For more information about combining objects with the background, see "Combining objects."
-------------------- Si Allen #562 La Mirada, CA. USA
(714) 521-4810
si.allen on Skype
siallen@dslextreme.com
"SignPainters do It with Longer Strokes!"
Never mess with your profile while in a drunken stupor!!!
Brushasaurus on Chat Posts: 8831 | From: La Mirada, CA, USA | Registered: Nov 1998
| IP: Logged |
![[For Your Information]](graemlins/fyi.gif)
Printer-friendly view of this topic