posted June 21, 2006 11:33 AM
I'm out of the NazDar Ink for some corro signs that I'm printing today. Has anyone ever used OneShot Lettering enamel on Corro? Is there anything else that can be used in a pinch? Thanks Y'all
-------------------- Lee McKee McKee Studios Birmingham, Al Planet Earth (sometimes) Posts: 277 | From: Birmingham, Al | Registered: Jan 2003
| IP: Logged |
posted June 21, 2006 11:37 AM
Lee, I know nothing about printing. But I do know that 1-S sticks to coro. Just watch out for static if you're painting. It takes awhile to dry! I think I'd call around to other screen shops in your area and see if they'll sell you what you need. love....jill
Posts: 8834 | From: Butler, PA, USA | Registered: Jan 2001
| IP: Logged |
posted June 21, 2006 11:48 AM
Cheers Jill, If it will stick that is good enough for me. NazDar seems to be harder to get than it used to be and I need to have this done asap. Thanks Again,
-------------------- Lee McKee McKee Studios Birmingham, Al Planet Earth (sometimes) Posts: 277 | From: Birmingham, Al | Registered: Jan 2003
| IP: Logged |
posted June 21, 2006 12:22 PM
Lee, Will work great but add some hardner to speed the drying. Otherwise you can be in for a day or two drying.
added: vinyl series will also work but be more easily scratched
[ June 21, 2006, 12:23 PM: Message edited by: Ron Helliar ]
-------------------- Ron Helliar Marysville Sign 11807 51st Ave. NE Marysville, WA 98271 (360) 659-4856 Posts: 263 | From: Marysville, WA USA | Registered: Feb 1999
| IP: Logged |
posted June 21, 2006 12:51 PM
BTW, I don't recommend using any harder. Instead, try putting just a drop (only one drop) of NazDar NB-70 into about 6oz. of OneShot.
It will help accelerate the drying and increase adhesion to the coroplast.
Printer-friendly view of this topic