posted
I always used CorelDraw except for when I want a nice drop/interactive shadow...then I use Vinyl Master PRo (one of these days I will learn the program enough to be able to use it all the time).
When I put a interactive drop shadow on some copy, I want my measurements to be in INCHES so I can know if I am putting a 1/4 " , 1/2" etc. on some lettering. I also would like to be able to go back into it and back adjustments without having to delete the shadow and re-do if its not just right.
Anyone know if its possible to set measurements to INCHES and make adjustments?
-------------------- Laura Butler Vision Graphics & Sign 4479 Welch Rd Attica, Mi 48412 Posts: 2855 | From: Attica, Mi, USA | Registered: Nov 2000
| IP: Logged |
posted
Set your type the way you want it and convert it to curves. Then you measurements will be in inches if the program is set right. Then do your drop shadow last.
posted
Shaun, When I do an outline, how do set it to know if I am putting a 1/8" outline on it or a 1/4". I know that I can put in a number like 1.0 or whatever, in that box but I don't know what that "1" represents.
-------------------- Laura Butler Vision Graphics & Sign 4479 Welch Rd Attica, Mi 48412 Posts: 2855 | From: Attica, Mi, USA | Registered: Nov 2000
| IP: Logged |
Printer-friendly view of this topic