posted
I searched the archives didn't quite find the answer to my question, so now I'll ask.
I have two replacement panels (56-3/4" x 8-1/4") to produce for a church. These panels only have the pastor's name on them. They only want the name to be lit. The name is to be white and the rest of the panel in a dark green. Is it possible to put white translucent on the entire back side of a clear leaxan panel and reverse weed a cast dark green for the front to get this effect? Will the cast last? Is it too opaque? A little bit of lighting of the green will be acceptable.
-------------------- Dana Blair Blair Signs Wooster, OH www.blairsigns.com
If sign makers go on strike, is there anything written on their picket signs? Posts: 835 | From: Wooster, OH, USA | Registered: Jul 1999
| IP: Logged |
I would lay the green vinyl over black and then cut. I would also keep some kind of border or panel around the preacher's name to facilitate a name change at a later date.
-------------------- Bruce Bowers
DrCAS Custom Lettering and Design Saint Cloud, Minnesota
"Things work out best for the people who make the best of the way things work out." - Art Linkletter Posts: 6451 | From: Saint Cloud, Minnesota | Registered: Jun 1999
| IP: Logged |
Printer-friendly view of this topic