posted
Looking for a few different ideas for a one-off a-board design. Size is 48" x 32", indoor only but on a pool deck.
Side one is easy, a simple logo at the top with a lower section of dry erase vinyl or dry erase board. Anyone used the dry erase vinyl before and still like it? Or is the dry erase board the way to go on this?
Side two is a bit more of a question for me. The client wants to be able to post notices and flyers (as in 8 1/2" x 11" paper) on this side, changing them weekly. He doesn't want pins, tacks or staples on the pool deck for obvious reasons. My thought was to face the board with an enameled/painted steel sheet and use small button magnets for attachment of the flyers. My worry here is rust if the paint/enamel get a small scratch.
Any other ideas out there?
Thanks! Mark
[ April 12, 2005, 09:23 PM: Message edited by: Mark Sheflo ]
-------------------- Mark Sheflo Renton, Washington A-Squared Signs, LLC Posts: 145 | From: Renton, Washington | Registered: Feb 2003
| IP: Logged |
posted
Someone's got magnetic paint happening... Home Depot???
-------------------- Janet Bakewell One Sun Grafiks Inc. Slave Lake, AB Canada www.onesungrafiks.com Posts: 128 | From: Slave Lake, AB Canada | Registered: Apr 1999
| IP: Logged |
posted
Hiya Mark, There are metal snap frames available. Check out this site... http://quickchangeframes.com/ Here's a picture of how we used them
They are made of aluminum and can be used outdoors.
Havin' fun,
Checkers
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
Printer-friendly view of this topic