Got a question from a costomer today: Can you cut transfers that ppl can stick on their screendoor (the against the flies doors) the material is coated glassfiber screen.
Any ideas what would stick to this stuff? pref a cloth-like flexible material wich comes in black.
posted
I had to do that some quite a few years back on a few doors.
1)Apply contact glue to material back in a uniformly manner. 2)Lay up on screen. (optional step)at this point, you can add more glue to opposite side of screen while material is applied. 3)Have WAX Paper on opposite side of screen keeping firm pressure as nessessary to assure flat material/image. 4)remove wax paper when set and touch up with paint if needed.
These were applied on screen doors at a resturant on the beach. They've been there looking nice and professional for over 10 years.
-------------------- AirbrushBobby.com Clearwater, FL The message of the cross is foolishness to those who are perishing.1Cor1:18 “The wages of sin is death, but the free gift of God is eternal life in Jesus Christ our Lord”Rom6:23 Posts: 505 | From: Clearwater Florida USA | Registered: Feb 1999
| IP: Logged |
posted
Thanks for your answer Robert. But its for a 'do it yourself' chain of shops in the netherlands, the use is gonna be repair and signal so i need to make 7200 little butterflies for the first order.... if i can find the right material that is
steef
[ March 02, 2005, 01:54 PM: Message edited by: steef de boer ]
Printer-friendly view of this topic