posted
I have Flexi 6.5 for mac, I can open Flexi and I can open P. Manager But not at the same time. I can't cut.
Has anyone ever had this problem.
Laura
-------------------- Laura Burke The Sign Studio 2022 N 51 st Milwaukee WI 53208 Mariah969@yahoo.com Posts: 14 | From: Milwaukee WI | Registered: Nov 2003
| IP: Logged |
posted
Is this a new install, or was it working fine before and it just started doing this?
This is how my pc version 6.6 v1 works. When in Flexi...go to file....then cut. If production manager needs to be set-up a box will pop up asking "on this computer" or "network" or "web address" Set up your port, ect... and you're done. Mine seems to lose the information quite a bit and need this done. I think it's because of closing the program "before" closing prod. manager.
Also you might try this. In Production Manager go to Setup and then Setup Properties. Check the port settings and everything there. Then save preferences in Flexi.
Also, several of us have had to clear the "preferences" to fix little bugs.
-------------------- Ace Graphics & Printing Camdenton, MO. USA
posted
If you have firewall software, make sure App.exe and App2.exe are given full server rights. In my Windogs 2000 system, they are found under Program Files/FlexiSIGN-PRO 7.5/Program. Any time ZoneAlarm gets updated or tweaked, I have to reset those permissions.
-------------------- David Harding A Sign of Excellence Carrollton, TX Posts: 5092 | From: Carrollton, TX, USA | Registered: Nov 1998
| IP: Logged |
posted
Do a hard boot. Turn everything off, printers, scanner and whatever and then hit the master switch overload protector and computer at the same time. Computer should reconize all periferals.
-------------------- Jack Wills Studio Design Works 1465 E.Hidalgo Circle Nye Beach / Newport, OR Posts: 2914 | From: Rocklin, CA. USA | Registered: Dec 1998
| IP: Logged |
Printer-friendly view of this topic