posted
Ok ive finally gotten off gerber and couldnt be happier. now i have flexi 7.5v4 and was plotting to my hs 15 plus plotter perfectly. now i have taken that out and installed the edge2 and envision 375 plotter. my results are not good. the prints are way grainier than with omega and the plotter is acting funny and cutting badly(not connecting corners, etc.)im sure it is something with the settings in the flexi rip. has anyone tried this before or have any helpful suggestions to try? any help would be appreciated. thank you.
I just took a training course on flexi 2 weeks ago. I have no idea how to answer your question. I dont have an edge so I don't know anything about running it. But one of the best things I learned about was www.givemehelp.com this is a flexi help website, already helped me a couple times.
JAKE
-------------------- Jake Lyman Lyman Signs 45 State Road Phillipston, MA 01331 Posts: 635 | From: Phillipston, MA | Registered: Sep 2002
| IP: Logged |
Printer-friendly view of this topic