posted
I would like to know where to buy or get free clip art that you can sell. Clip art like the Calvin that pee'z on everything or the bad boy that flex his muscle. I am just putting together my clip art (software) and would like to add to it. Please give me some help in locating some of this art (software).
Thanks, Joe
-------------------- Joseph Istre JR Joe's Custom Shop 17470 Peloquin Rd Jennings, LA Posts: 9 | From: Jennings, LA | Registered: May 2003
| IP: Logged |
-------------------- a.k.a. Brian Born www.CheckersCustom.com Harrisburg, Pa Work Smart, Play Hard Posts: 3775 | From: Harrisburg, Pa. U.S.A. | Registered: Nov 1998
| IP: Logged |
posted
Hi Joseph....You want "FREE clipart that you can SELL"???
Don't we all want the free ride?
It IS out there...it is easy to find....use your favourite search engine....BUT you have to do the work to find it.
Ya think I 'm gonna tell you where I get MY free stuff???????
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
posted
i havent had a request for that type of stuff in a couple of years. If fact I put all that stuff in a box on the back shelf..
Tribal stuff and deer and duscks, and dogs, and special words, and lots of tears and rips now. But no more calvins or other stuff like that. Waste of money, time and material to find it and save it.
-------------------- Leaper of Tall buildings.. If you find my posts divisive or otherwise snarky please ignore them. If you do not know how then PM me about it and I will demonstrate. Posts: 5278 | From: Im a nowhere man | Registered: Jul 2001
| IP: Logged |
Most of us here that cut vinyl make our own "clipart". There are many programs available that you start with a picture of what you want, and you have to "trace" it in a vectorizing program. This converts the picture into a cutable file, or a "vector file". If you do want to get into cutting vinyl, you will most likely need to get one of these programs. Some I can think of are coreldraw, signlab, flexisign, etc.
People don't normally give away their files, as they are alot of work to trace and clean up so they cut well. There are lots that are willing to trade, so chances are better if you learn to vectorize your own stuff, you can trade with other people.
Good Luck, Suelynn
-------------------- "It is never too late to be what you might have been." -George Eliot
Suelynn Sedor Sedor Signs Carnduff, SK Canada Posts: 2863 | From: Carnduff, SK Canada | Registered: Nov 1998
| IP: Logged |
posted
HAHAHAHAHAHAAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAAH FREE CLIPART..............YOUR OFF TO A GOOD START...
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
I never said I wanted a free ride. If you could read correctly you would see that I asked where I could get clipart. TO BUY or for free. Go back and read my post. See what I wrote...."I would like to know where to BUY or GET free clip art that you can can sell." I just wanted to know where to buy it. And....I want to sell it after I print/cut the graphics. Not sell it right after I buy it. I asked for help, not for you to do the work for me. So far everyone has been helpful, except for you and your sarcasm. Maybe you shouldn't be on this board if all you have to give is sarcasm. If it wasn't sarcasm then forgive me, but it sure sounded like it to me. Again I never asked for a free ride or for you to do the work for me.
-------------------- Joseph Istre JR Joe's Custom Shop 17470 Peloquin Rd Jennings, LA Posts: 9 | From: Jennings, LA | Registered: May 2003
| IP: Logged |
posted
If yer refering to me Joseph...go look at all the little smilie things in my reply. They indicate smiles and winks.
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
quote:Originally posted by Joseph Istre JR: I never said I wanted a free ride. If you could read correctly you would see that I asked where I could get clipart. TO BUY or for free. Go back and read my post. See what I wrote...."I would like to know where to BUY or GET free clip art that you can can sell." I just wanted to know where to buy it.
"I would like to know where to BUY or GET free clip art that you can can sell."
is not exactly the same as
"I would like to know where to BUY or GET, free clip art that you can can sell."
-------------------- Bob Sheers 24 Hour Services Columbia, MD USA 410-995-3655 bob@go-to-airport.com Posts: 140 | From: Columbia, MD, USA | Registered: Sep 1999
| IP: Logged |
"Clip art like the Calvin that pee'z on everything or the bad boy that flex his muscle" = pretty much every sticker design that gets sold at flea markets for the last 5 years. Most of that stuff is very easily found online with a search. There's certaily enough of them out there. Most are "bootlegged" designs that violated several copyright laws.
"I am just putting together my clip art (software) and would like to add to it. Please give me some help in locating some of this art (software)." My temptation to make a few rude wisecracks about burning CDs and calling it software aside, there are many suppliers here in Letterville who sell a wide variety of royalty free clip art on CDs. Just click on the "Letterville Merchants" link and have a look. Many have files that can be custom altered to fit vehicles, truck, etc.
It's not you, Joeseph. There have been a lot of people register here in the hopes of getting a handout in the past, and maybe the way you worded rubbed a few people the wrong way. I noted the name of your business and would point out that cranking out the same old stuff that can be found at flea markets really doesn't fall into the definition of "custom".
Welcome to Letterville. Rapid
-------------------- Ray Rheaume Rapidfire Design 543 Brushwood Road North Haverhill, NH 03774 rapidfiredesign@hotmail.com 603-787-6803
I like my paint shaken, not stirred. Posts: 5648 | From: North Haverhill, New Hampshire | Registered: Apr 2003
| IP: Logged |
posted
Another problem here is sarcasm.... SOMETIMES people really intend to be sacastic and mean, but most of the time, if you could hear HOW they said what they said, they are joking around. Sometimes the distiction between the two is obvious, but other times it depends how you take it. That is one big problem with the internet, the way I see it. If you were standing side by side and someone SAID some of these things to you, you would have a better sense of their intention...and THEN you could punch them in the nose! (I'M JOKING!) No really, you just hit a raw nerve about asking for clip art here. People work hard to buy or make up their own library and it rubs them the wrong way when you want to get it. AND they don't even know you yet....give the guy a break, guys! And Joe....lesson learned? We really ARE a nice group of people....just have some quirks now and then. Check this out... www.thefontry.com They are merchants here and they are running a dynamite special of ALL their clip art and fonts for $99! We just got ours a couple weeks ago....some good stuff! And as Pat King always says "...hope this helps."
[ May 15, 2004, 04:33 PM: Message edited by: Jane Diaz ]
-------------------- Jane Diaz Diaz Sign Art 628 W. Lincoln Ave. Pontiac, Il. 61764 815-844-7024 www.diazsignart.com Posts: 4102 | From: Pontiac, IL USA | Registered: Feb 1999
| IP: Logged |
posted
Thank You very much for your input. I'm Not looking to violate any copywright laws. In fact I'm trying to do the opposite, I would like to obtain graphics legally. A few of my customers have asked me for them, but I'm not sure where I can get them along with the copywright to use them. I don't want to copy them from others who do not have the copywrights. Like the book of corporate logos I bought from signwarehouse, which gives me the graphics and the right to use them accordingly. Maybe I should have worded my question differently.
I am a custom shop in the way that I customize their vehicle to the way they want it, including other things, not just graphics.
Again, thank you for the info. You have helped alot.
-------------------- Joseph Istre JR Joe's Custom Shop 17470 Peloquin Rd Jennings, LA Posts: 9 | From: Jennings, LA | Registered: May 2003
| IP: Logged |
quote:Originally posted by Joseph Istre JR: I'm not sure where I can get them along with the copywright to use them. I don't want to copy them from others who do not have the copywrights.
The best answer to this would be NOT EBAY!
I think someone posted Roland's website ww.rolanddga.com which has a lot of vector art, costs $1 a piece & is emailed to you in seconds.
Most suppliers have vector art packages too and they don't all carry the same ones, check around.
-------------------- Chris Welker Wildfire Signs Indiana, Pa Posts: 4254 | From: Indiana, PA | Registered: Mar 2001
| IP: Logged |
posted
Joe, I don't believe that buying a CD of corporate logos gives anyone the right to do what they want accordingly. Using a corporate logo maybe fine on ones vehicle, but using the CD's to cut in quanity can wound you up in a courtroom.
Theres so much more to learn then just cutting from CD's.
-------------------- HotLines Joey Madden - pinstriping since 1952 'Perfection, its what I look for and what I live for'
posted
You can use the "search function" on this board to find DISCUSSIONS on this subject. You can use the "merchant section" on this board to find the CLIPART you need. As Jane states:we REALLY are nice people here! I personally use sarcasm jokingly,but is usally taken the wrong way(when typed)
I sometime think that with ALL the features within Letterville. The correct answer can be found with SOME WORK on the part of the person asking the question!
hope this helps
-------------------- PKing is Pat King The Professor of SIGNOLOGY Posts: 3113 | From: Pompano Beach, FL. USA | Registered: Nov 1998
| IP: Logged |
posted
The corporate logo CD's and other "software" that contain images like Calvin DO NOT automatically grant you permission to use the artwork! You must still obtain permission from the copyright/trademark holders to reproduce the artwork.
CD's like the Vector Art Mega Collection DO grant permission to use the artwork as the artists who contribute to those are commissioned and compensated (lump sum or royalties) for their original work.
-------------------- "If I share all my wisdom I won't have any left for myself."
Mike Pipes stickerpimp.com Lake Havasu, AZ mike@stickerpimp.com Posts: 8746 | From: Lake Havasu, AZ USA | Registered: Jun 2000
| IP: Logged |
posted
your 3rd post and you asked where to get FREE CLIPART......i dont care how you wana phrase it..it still comes across the way it sounded....so now you got 5 posts......it gets better....hehehehehehehehehehehehehhee
-------------------- joe pribish-A SIGN MINT 2811 longleaf Dr. pensacola, fl 32526 850-637-1519 BEWARE THE TRUTH.....YOU MAY NOT LIKE WHAT YOU FIND Posts: 11582 | From: pensacola, fl. usa | Registered: Nov 1998
| IP: Logged |
posted
Joe, just a little tip: sometimes it's not worth it, searching the net or digitizing a piece of clipart that you're gonna sell for, say, twenty bucks? Try a little sales tactics and tell them it is soooo out to put Calvins on trucks, but it just so happens that you have some of the newest and coolest designs here, bla bla bla...you get the picture. One customer that doesn't get his Calvin isn't gonna put you out of business.
My two cents, and since they're Canadian cents they're not even worth that much, oh well.
posted
Man, am I ever sorry that I accidentally put that word FREE in there. Some of you not so nice people are taking things so literally. Guess I'm not good at writing or typing what I mean. You keep mentioning the word free. Why don't you mention that I also said buy. I bet if someone put up a link to a site to get free clipart that you would be the first one on it. hahahahahahaha!!!!!!!!!! I understand and get the point about the logo book too. The book does not give me the right to copy, but if a company ask me to print their logo for one of their trucks, and provided that they give me permission on letterhead paper, then I have the right to do it. Again, I did not explain myself well.
O.K. I have apologized to some of you who seem so rude and now I am going to drop it and ignore the not so nice of you.
And to the others, you have really been a big help. Thank you for all the links on where I can buy clipart.
Thanks, Joe
-------------------- Joseph Istre JR Joe's Custom Shop 17470 Peloquin Rd Jennings, LA Posts: 9 | From: Jennings, LA | Registered: May 2003
| IP: Logged |
posted
wanna see some real cool "stickers" (however they are not free), but if you have a print/cut machine it is like a license to print money if you get the $129 software.
![[FYI]](graemlins/fyi.gif)
![[Big Grin]](biggrin.gif)
![[Wink]](wink.gif)
![[Smile]](smile.gif)
![[Confused]](confused.gif)
If it wasn't sarcasm then forgive me, ![[Dunno]](graemlins/dunno.gif)
but it sure sounded like it to me. Again I never asked for a free ride or for you to do the work for me.
![[Roll Eyes]](rolleyes.gif)
![[Thanks]](graemlins/thanks.gif)
Printer-friendly view of this topic