posted
My niece recently purchased a plotter with win pc letter 12.0 and cannot get the softwear to recognize the plotter. She has connected the plotter to her computer with the supplied serial cable and seems to have trouble selecting and setting the right comm. port for the plotter.
Her normal job hours are the same as where she purchased her equipment from so it is very hard for her to contact them by phone for advice. Also, at present, she does not have access to the internet. Her OS is windows XP. I have talked with her several times on the phone and told her I would post something here and see if I could get her some help.
Thanks for your help, John
-------------------- John Weber 3863 Buckskin Rd. NE Carlos, MN 56319 800-853-7051
posted
John..There are updates to WinPC Sign 12 at THIS LOCATION
Updates might just help. Other than that I can't offer any other solutions.
edited to say....."Opps no internet access, maybe someone could download the update, burn it to CD and she could use that."
Also...When I first started, I used an old version of their software and LPT was the simplest way to go, like RT has suggested. No messing with baud rates and stuff. Just plug and play with an LPT connection.
[ May 08, 2004, 11:05 PM: Message edited by: Dave Grundy ]
-------------------- Dave Grundy retired in Chelem,Yucatan,Mexico/Hensall,Ontario,Canada 1-519-262-3651 Canada 011-52-1-999-102-2923 Mexico cell 1-226-785-8957 Canada/Mexico home
Printer-friendly view of this topic