posted
A few week ago, I read this topic in there but don't remember exactly how to re-fill ink to plotter pen. I use rollerball pen, fine (0.3mm) for my samma dc-60 plotter. I usually order from some company in pa, but last time they told me can't find more after this order. so I hope some one there know how to re-fill or where can buy? thanks a lot.
-------------------- Linda Yang Wilbraham, MA arttec@samnet.net Posts: 139 | From: wilbraham, ma usa | Registered: May 2000
| IP: Logged |
posted
get an ink pen or a sharpie, wrap some masking tape around it until in fits snug into the pen holder,,,, clamp it
Plot away,,,,
-------------------- Leaper of Tall buildings.. If you find my posts divisive or otherwise snarky please ignore them. If you do not know how then PM me about it and I will demonstrate. Posts: 5273 | From: Im a nowhere man | Registered: Jul 2001
| IP: Logged |
posted
Linda....I also have a Summa D60. The plotter pen is a typical pen used by many kinds of pen plotters used by draftsmen and engineers. I haven't yet had the need to replace mine, but I would first check Staples or OfficeMax or some other Graphics Supplies store. Or you can go to the Summa website and order directly from them. Summa Store They are a Letterville merchant. Good luck.
-------------------- Mike"Spud"Kelly zipperhead design Westminster, MA Posts: 367 | From: Westminster, MA | Registered: Mar 2001
| IP: Logged |
Printer-friendly view of this topic