posted
I've got a few signs to quote that this material would be perfect for... none of my "regular" suppliers carry it though... any specific info on the material would be nice too.... is it easy to work with, cost effective, etc.
posted
These are suppliers in my region but I'm sure they can direct you to one in your area. Total Plastics 800-442-6839 Laird Plastics 888-925-9240 Harbor Sales 800-345-1712 (They sell ColorCore but it is the same thing. Plateak Inc. 330-668-2587 ( They are in Akron don't know if that is near you but I would try them first. They refer to it as recycled plastic signs. I have ordered from them a couple of times and have gotten really good service.)
-------------------- TJ Duvall Diamond State Graphics, Inc.
New Castle, DE 19720 Posts: 396 | From: New Castle,Delaware | Registered: Jul 2002
| IP: Logged |
posted
John Try their website for contact info. I had a big job last summer with Polycarve. I contacted them. They gave me a local suppliers name. Hopefuly you'll find somebody close to save on shipping.
-------------------- Tom Bahr Custom Signs of St. Cloud, Inc. St. Cloud, MN 320-255-0588 tbahr@astound.net Posts: 71 | From: St. Cloud, MN | Registered: Apr 2002
| IP: Logged |
posted
That stuff is HEAVY. Bought a 3/4" 4x10 sheet, weighed over 300 pounds. Took two men to wrestle the thing around. Be aware that suppliers don't tend to stock many sheets at a time, and that most carry a limited number of colors. It carves beautifully (on a CNC). I just use HSS straight bits, typically 1/8 to 3/16.
-------------------- Tim Whitcher Adrian, MI Posts: 1546 | From: Adrian, MI | Registered: Mar 1999
| IP: Logged |
posted
i had to buy a pallet to make it worth my time...glad i did! it does rout on the cnc nicely...the only thing i ran into is using the 1/2" i needed to do a big letter and 120 degree vbit was all i had. thank god my buddy at storyland had a 150vbit..saved my a$$ and the project came out great.
-------------------- Karyn Bush Simply Not Ordinary, LLC Bartlett, NH 603-383-9955 www.snosigns.com info@snosigns.com Posts: 3516 | From: Bartlett, NH USA | Registered: Jan 2001
| IP: Logged |
Printer-friendly view of this topic