Here's one we just pulled out of the shop, printed with the 54 Versa Camm at 72 dpi, on Arlons Fleet Graphic conform and laminated with same... not a wrinkle, bubble, or crease.... this stuff is magic.
[/IMG]
[/IMG]
Posted by Mark Stokes (Member # 5351) on :
Looks great, I have never done a wrap before have a client interested in one are they hard to do?
Posted by Neil D. Butler (Member # 661) on :
They can be tricky, you HAVE to use the proper vinyl, like Arlon's Conform type or 3m's Conform...also the compatible laminate, a second hand will be useful until you get efficient at it, if you can go to a seminar on wraps, they are put off all the time, the big sign shows usually have installers doing demos as well... there's always You Tube... Good Luck! and Thanks.
I guess it's starting to cool down where you live now, is'nt it?
Posted by Mark Stokes (Member # 5351) on :
Thanks Neil they are off putting but I suppose when you are shown how to do it you get the hang off it, must get to a seminar but they do not do many here. Yes we are in winter where I live but it does not snow temp for the day would only go as low 12 degrees celcius night temp would get to as low as 2 degrees.
[/IMG] 
[/IMG]