Here's an Edge job we just did. We didn't design the logo, just used existing logos and artwork that they use in advertising. It runs on all 4 sides. Let's see if this works.
------------------ Bruce Evans
[This message has been edited by Bruce Evans (edited March 15, 2001).]
[This message has been edited by Bruce Evans (edited March 15, 2001).]
Posted by Mark Fair Signs (Member # 289) on :
nice work bruce! i bet that was a bitch installing the edge print! i was wondering... how long does a "body wrap" like that take to install?
"Mark Fair is a Proud Contributor to The Letterhead Site!"
Posted by Bruce Evans (Member # 44) on :
Thanks Mark. This particular one wasn't too bad wrapping. The trouble spots on this one were the fenders. They have kind of a recesessed area. We basically carefully torch the vinyl on mold into the contour. We were able to do this one without one crease. If i had it to do over again, I'd think about using horizontal panels instead of vertical. Although using numerous horiztonals makes it easier to fix if you happen to screw up a panel.
The job had about 45 panels and took two of us a day and a half. The printing took a day and I also clear coated the prints just to be safe.
