Hello, Hey what happens to the itsi, bitsy, tini tiny, little residue of application fluid left under applied vinyl? Does it evaporate? Does it find it what out through the little pin holes? Or does it eventually made more bubbles when it the sun? Just womdering?
Posted by Terry Baird (Member # 3495) on :
I've never had a problem with Rapid Tac or Rapid Tac 2. We've got some in the shop and on the truck.
Posted by Dave Sherby (Member # 698) on :
It evaporates. And when they call it Rapid Tac, they mean it.
One time I put on part of a multi part graphic wet. I realized within a few minutes that I needed to put down a different layer first. Well I'm tellin ya, that vinyl was down tight. Dry applied vinyl has always come off real easy if removed right after application. The vinyl applied with Rapid Tac was on in 5 minutes like it had been on the full 24 hours for max adhesion. Posted by roger bailey (Member # 556) on :
I have been tellin folks for years "wet application with Rapid products bonds better then dry", there is a reason for this (quoted in spec. sheet from Fassonback in 1988).
The adhesive flows out MORE uniformely with Rapid Tac or Tac II then when applied dry, notice the "trapped air" when you apply dry? wherever you see air is where its not bonded!!!!
![[Applause]](graemlins/clap.gif)
![[Wink]](wink.gif)