have a Gerber 4b signmaker with graphix advantage software..I'm not sure, but I think the dongle is dead..I tried contacting Gerber..they want to charge me $30.00 to put me through to a tech.Does anyone have a suggestions in getting this ole machine running again..I understand that I can put in a CAD Link Fast Board and run my existing Signlab software..anyone want to trade?? I have the Graphix Advantage LMK Module including all the manuals that I could trade or give me a quote for you CAD Link board in addition, I have the Brush script and general symbols font modules to sell or trade.
Posted by Fred Weiss (Member # 3662) on :
If your dongle is dead then the Grafix Advantage software won't launch. Don't know for a fact, but I'd be surprised if SignLab didn't drive the LMK board .... so if the board is good there's little reason to switch.
Posted by Frank Droog (Member # 3958) on :
I have never personally dealt with an lmk setup but a dealer has told me that Signlabs 4B with the LMK driver in Signlab e61 does drive an LMK kit.
Since this driver is a clone of Signlabs "Gerber HS/GS" driver, any version of Signlab may drive it with the Gerber HS/GS driver
The only thing is you may need a password to activate the "Gerber Extended driver" feature, or you may have that enabled allready.
Wish i could say i was on the phone with a user with the machine actually cutting in the background, but i can only relay the results of a dealers experience. frank at cadlink. frankd@cadlink.com
Posted by Robert Larkham (Member # 2913) on :
I have a 4b, S750, Unilink card and switcher box for sale on the classified page if this helps. All for $500.
Posted by James Donahue (Member # 3624) on :
Hey Rob...
How do I get to this "classified section"? I tried to check the auction page, but couldn't find it there.
Thanks for any help.
Posted by Judy Pate (Member # 237) on :
James, You can get to the classified page by scrolling down on the main BB page and clicking on Classified....just under The Portfolio link. Judy
![[Smile]](smile.gif)