Anyone here have experience (good or bad) with one of these? I have an opportunity to buy a used one. The seller says it is about two years old but hasn't been used for the past year. Thought it might have 100 hours on it. Is there anything I should be watching out for? Will be running it from SignLab 5.
Thanks for your time to give me some advise.
Posted by Doug Allan (Member # 2247) on :
I got the 24" CE1000-60 it is rock solid. Runs like a champ 4-5 years with no down time. I once set the pressure too high & advanced the blade out too depp for some thick stuff, & cut into the teflon strip. $12 later I was back in business, & learned my mistakes so I was able to cut that stuff in the end. One thing to know, is the 60 degree blades need a seperate blade holder assembly from the 45 degree one. Maybe you will get both. Ask for both in case he forgot after a year. (On mine, the 45 is red, the 60 is blue)
Posted by Michael Berry (Member # 2604) on :
Chuck-
We have had ours for about 5+ years, great luck so far, no complaints at all!
