This is topic EZ UP Tent in forum Old Archives at The Letterville BullBoard.


To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/13/14934.html

Posted by Sharon Bigler (Member # 2203) on :
 
Customer wants his EZUP tent lettered with vinyl. It's made of polyester and on their website, they offer fabric letters that stick on.
Has anybody ever tried to letter one of these before? Thanks!
 
Posted by Tasmus (Member # 445) on :
 
complete guess here----

But Creative Banner (8005288846) offers a product called FABRICBRITE that can be cut on your plotter and taped and appied normally. It is made for NYLON, but might work here...give em a call.

B
 
Posted by Steve Barba (Member # 431) on :
 
Did one of those a couple of years ago, I was up front with the customer that there were no gaurentee's that I would be succsesful. What I did was use intermediate vinyl, and a heat gun through the transfer tape, and used the heat gun again when the letters were installed. Seemed to work well enough, just a major pain.
 
Posted by jimmy chatham (Member # 525) on :
 
i do them all the
time using dac tac
 
Posted by Sharon Bigler (Member # 2203) on :
 
Maybe I'll try all three? Thanks to all of you for taking the time to post:-)

Jimmy, what's the process with the dac tac?
 
Posted by jimmy chatham (Member # 525) on :
 
cut it on you computer
and apply it like vinyl
must be clean & dry.
 


Powered by Infopop Corporation
UBB.classic™ 6.7.2