[ July 21, 2003, 11:41 AM: Message edited by: Steve Shortreed ]
Posted by Randy Campbell (Member # 2675) on :
I am sorry I don't know how to put the web site in so you can just click on it.If some could help or explain the way I would thank you.
Posted by Wayne Webb (Member # 1124) on :
Randy, Just leave a space between the web adress and your last sentnce. It should then automatically turn into a hyperlink.
Posted by Bill Cosharek (Member # 1274) on :
Randy,
Try it like this. www.home.cogeco/~jchambers2/ Be sure to leave a space before & after the address without adding any punctuation which is not in url. It should automatically become a link when posted. You don't need the http:// part. I didn't test the link 1st so we'll see if this works. It should.
(edited in) Wayne types faster than me. That's how its done but the link I tried didn't work. Check that address again & type as recommended. Good luck.
[ July 21, 2003, 11:43 AM: Message edited by: Bill Cosharek ]
Posted by Doug Allan (Member # 2247) on :
shouldn't there be a .com or something in there? If you can get to the site again Randy, are you just highlighting the address as it appears in your browser when you are at the site & then copying that address to your clipboard? That is the easiest way to get it correct when it is a complicated address with strange spellings & slashes etc. I see you just edited your link but I still am not arriving at the site.
Posted by Sunny Holtzlander (Member # 4012) on :
