I put my paint mask on the Sintra panel-sanded cleaned as told and put first coat of Krylon acrylic latex exterior on.BAD move.The paint went on blotchy and looked horrible.Put second coat on later and still looked bad.I removed paint mask and will take a old quill out and try again,this time if it dosen't look good it's back to enamels.Why me me me me ??????
Posted by AdrienneMorgan (Member # 1046) on :
Randy...I've done a couple of things on Sintra in acrylics....artwork, and my swap panel....
I lightly sanded it first, then gave it a light coat of waterbased primer...it still looks really good...after I was done with my panel I sprayed it with 2-3 coats of One Shot UV clear coat to protect it.
I really liked the results.
Did you roll or brush on the latex?
Since I worked in artist's acrylics, maybe the results are different from Latex exterior housepaint.
