Gotta 48" cutter that the blade appears to be sticking. Either that or the circuit board is not telling the blade to lift before it has to drag itself to the new location and start a new cut. Sometimes it works and other times it doesn't.
Sound familiar???? Any help or advice would be greatly appreciated.
Posted by old paint (Member # 549) on :
who made it? what model? are you connected serial or comm? some question just need to be answered...
Posted by Corey Wine (Member # 1640) on :
Vinyl Express - Vinyl Pro 52
Made - Great Computer Corp. in Taiwan
GRC 132S - Model no.
Serial Port
Posted by timi NC (Member # 576) on :
the plotter should have a test cut routine if the problem persist during that test it is in the plotter,...otherwise it is in your software which you do not say or describe in your question. Hope this helps ya!
Posted by Corey Wine (Member # 1640) on :
The soft ware is Flexi pro.(i doubt it's the software) The other 3 vinyl cutters are also on FSPRO. One of the 3 other plotters is also a 48" Vinyl express. My first born Daughters name is Cora if that helps.
I can do a test cut and have it come out perfect, then hit "SEND" through my plot manager and its dragging from point to point. Then I can hit "SEND" again and it will work perfectly again. It's very spontaneos and spuratic(speratic?)like no rhyme or reason.
Posted by old paint (Member # 549) on :
who would name their child "cora"?.....hehehehehehe
Posted by Corey Wine (Member # 1640) on :
Don't start now!!!
Corey + Lisa = Cora
It was either that or Lisey!! It's a nice name! Don't get me started on NEW MILLENNIUM NAMES now like MacKinsey or Tyler or Taylor or Skyler or Trinity or Kirsten(not Kristen, Kirsten) Dylan, Lindsay, Cody.....I could go on for days (and probably will now that I probably bashed some sign peoples kids names...he he he ). all in good fun eh?
Posted by old paint (Member # 549) on :
HAHAHAHAHAHAHA its better then SUE!!!!!good humor....hahahahahahaha
Posted by KARYN BUSH (Member # 1948) on :
i had a roland pcn1100 that did that when it felt like it...i had to really clean it good...dust dog hair etc...and it worked for a while...then after that i had to replace the knife holder because the barrings were shot. did you ask the company that makes the plotter?? they should have an answer for ya.
Posted by Robert Thomas (Member # 1356) on :
Tech from where you bought it should help.
Posted by Michael Boone (Member # 308) on :
Corey Good thing yer last name isnt "Plast"...................
