I sent this file to a transfer co. and they said that they couldn't see the little "H's" on the 4-H logos. They said that they could see the ones on one of the bottom ones but not the other four.
Can some of you guys open them (EPS files) and tell me what you see? Let me know if you can do it and I'll send you the file. Thanks Wayne
Posted by Dave Grundy (Member # 103) on :
Sure Wayne...Send the file up here!! I'll see if I can see everything.
Posted by Wayne Webb (Member # 1124) on :
Thanks Dave It opened fine for Dave. Does anyone use Adobe Illustrator who could try it? Thanks Wayne
Posted by Doug Allan (Member # 2247) on :
sure, send to signshop@islandsign.com
Posted by VICTORGEORGIOU (Member # 474) on :
Wayne, filters sometimes do different things depending on what program you are exporting from and what program you are importing into. If Dave can open it with Corel, then most programs should import it. Do you know what program your vendor is using? Vic G
Posted by Wayne Webb (Member # 1124) on :
Hey Vic, They said "Illustrator" so I'm asuming Adobe Illustrator.
Posted by Doug Allan (Member # 2247) on :
Wayne, when viewed in "wireframe" all 3 logos contain H's in the clover leaves. In fill mode 2 of the 3 logos show solid black H's. I went to ungroup the selection, but it was not grouped. All 3 logos were a compound object (or "combined" objects)I released the compound & fixed it and sent it back.
