I need some Edge decals 3.25" wide X 1.75" tall on white cal. or cast vinyl 3 colors print. Probably will need about 40 or 50. If interested give drop me an e-mail with a quote at jtt101@hotmail.com. It ain't much of an order but I hate loosing these Edge jobs. Posted by Doug Allan (Member # 2247) on :
Should run about $1 each with some possible set-up costs on such a short run. For future reference I am sure I could sell you that size 3-color decals for about $ .50 on larger orders.
No point shipping them halfway around the world(OK maybe it's only 1/4), so hopefully you can find a vendor close by. The set-up is pretty basic, but some 3 color files end up needing more work then others when the designer doesn't understand what the printer needs, so get a local edge print wholesaler that will show you the best set-up for him, based on your software.
I used to sub out my edge work across town. I nested units into the 11.8" max print area, created my cut line files on a seperate layer from my print information. I also weeded & taped the prints & cut into units on my rotary cutter if needed. This way I got a good wholesale price & was able to gradually, & profitably build up enough market for edge work to feel secure in the expense of getting my own.
If no one close comes through, I would help, but I'm confident you do or will have many offers.
Posted by Mike Kelly (Member # 2037) on :
John, contact Bob Rochon about the decals. Super job and great service! Just remember to tell him not to ship them in a tube (sic). He is the "Edge Master".
![[Cool]](cool.gif)