Any suggestions where I can find this one? I tried Clark & they suggested Nelson Harkins but I'm still waiting for a catalog. Any help would be greatly appreciated. Havin' fun, Checkers
[ August 25, 2002, 11:56 PM: Message edited by: Steve Shortreed ]
Posted by VICTORGEORGIOU (Member # 474) on :
Checkers, Johnson Plastics sells the basic parts that you need. I think the product is made by JSI sign systems in LA, but not sure.
Johnson sells the top and bottom bars in both silver and gold anodized aluminum in two or three vertical sizes. If memory is any good, they will custom make any horizonal length. Or they will sell you the entire assembly made to your dimensions. We always bought the top and bottom bars and fabricated our own system. You can make the strips any number of ways, one being to use clear frosted engraving stock, backletter with vinyl, and then spray the back with black. It looks like a million dollars.
Johnson also has flyers that they will give you in small quantities, or you can purchase in large quantities, to assist in selling the product.
Nelson-Harkins will sell you "bare" systems, but they really get pushy about trying to upsell to a finished system. They do make nice products, however. Vic G
Posted by Checkers (Member # 63) on :
Hiya Vic, Thanks for the quick reply. I'm trying to get off easy on this one. Although I do have the resources to make something similar, i'm trying to find an "off the shelf" system that I could just letter and install. Supposedly, this could lead to a much larger project, a 23 story building, in which I would not be able to manufacture in a timely manner. I also did a search on the net for JSI Sign systems and only came up with a supplier in Atlanta, Ga. Would you, by chance, have the number for the place in California?
Thanks, Checkers
Posted by VICTORGEORGIOU (Member # 474) on :
