This is topic Roger Bailey - Rapid Remover question: in forum Old Archives at The Letterville BullBoard.


To visit this topic, use this URL:
http://www.letterville.com/ubb/ultimatebb.php/topic/13/9482.html

---

Posted by Todd Gill (Member # 2569) on :
 
Hey Roger,

I spray mount a lot of designs on a cement floor using 3M Super 77. I lay Craft paper down first, but still, the overspray gets on the floor because of "mist drift".

Just wondering: Would Rapid Remover clean this type of adhesive residue off of a cement floor? If so, what would your cleaning recommendations be? Thanks.

Todd
 

---

Posted by roger bailey (Member # 556) on :
 
I can't give a definate, but I don't see why not.

Spray,wait 60 seconds,wipe with rag, rinse with water?

Roger
 

---

Posted by Doug Allan (Member # 2247) on :
 
at $2 a gallon, I'd use paint thinner.
 

---

Posted by Joey Madden (Member # 1192) on :
 
for any type of overspray whether glue or paint I use the clay stuff thats sold at a auto body supply house. My Valiant had paint overspray, pollen and all kinds of crap on it, and it did the trick!
 

---

Posted by roger bailey (Member # 556) on :
 
Joey, you use it on concrete ?

Roger
 

---

Posted by Todd Gill (Member # 2569) on :
 
Thanks guys! I'll give 'em a try.
 

---

Posted by Kent Smith (Member # 251) on :
 
We used a lot of 77 for displays for the 4th and had a little overspray on one end of a table. Rapid remover worked well to remove it and it only took a very light spray of the remover to losed the adhesive.
 

---

UBB.classic™ 6.7.2