Hi Guys I'm having a problem with setting my plotter to cut a long run (70")without tiling-roland cx24 first time cutting that lenght! I design the layout(13"x68") in signlab ES2 lite,an when I go to plot it shows tiles 1 X 3 plotter setup paper size is 984.000x23.000 any help would be greatly appreciated thank you
[ July 05, 2002, 03:24 PM: Message edited by: Don Southard ]
Posted by old paint (Member # 549) on :
more explaination......
Posted by Dave Grundy (Member # 103) on :
Don...The CX will cut a LOT longer than 70". You didn't say what cutting software you are using but in the window where you set the vinyl width and length just set it to whatewver length you want. I use a CM 24 (the predecessor to your machine) and regularly cut 10-15' long solid stripes for highway trucks and trailers. The "default length" is 62.99" but you can go lots longer.
Just looked in my user manual...max length is 984.125" (24,998 mm)
[ July 05, 2002, 03:25 PM: Message edited by: Dave Grundy ]
Posted by Don Southard (Member # 2488) on :
Thanks Guys for taking the time,after more studying I figure out the paper size was in mm an not in (") so i reset and it cut great!!!
