Which router bit is best to use with a hand held router on sign foam
Posted by John Smith (Member # 1308) on :
My norm is the 45 degree chamfer with a 1/4" bite and the 1/2" bead. I hardly ever use anything else on SignFoam. Once in awhile, I will use the ogee. Whatever you use, it should have the bearing guide.
Posted by Terry Colley (Member # 1245) on :
You can use almost any bit that you would use on wood, foam is a very easy material to rout as it is relativley soft compared to timber and there is no grain to deal with. cheers TErry
[ June 12, 2002, 04:41 PM: Message edited by: Terry Colley ]
