Rapid Remover fixes those viri just fine. What did they do to your knee?
Posted by Dave Grundy (Member # 103) on :
Welcome back "King Roger"!!!! LOL LOL
I wondered what happened to ya.
You know..if you had them install grease fittings into the new knee, you could just pump in some teflon every once in a while and use Rapid Prep to clean off the residue around the grease fitting!!!!!! Posted by Linda Silver Eagle (Member # 274) on :
Welcome back Roger!!!!!!
Mike, thanks for posting the link, that was too funny!
Posted by John Thompson (Member # 2750) on :
Hey Roger, I have an idea for a new "invention" or product for Rapid-Tac htat you can work on while you are down, how about Rapid-Weed, just spray it on the vinyl and it'll weed it for you, ha!ha!ha!. Just a little get well humor, I got a bum knee to and have always tried to keep from letting them cut on it but I am sure it'll happen one day.
Posted by cheryl nordby (Member # 1100) on :
I missed your smiling face Roger! Posted by FranCisco Vargas (Member # 145) on :
Welcome back Amigo! Glad your back and moving around again. Be cool and install "all the latest Virus Programs" There are some sneaky suckers out there.
[ May 16, 2002, 12:31 AM: Message edited by: FranCisco Vargas ]
Posted by old paint (Member # 549) on :
rodger....who???????? and where you from?????hehehehehehehehehehehhe
Posted by Joel Peters (Member # 622) on :
Welcome back! Good to see ya.
Joel Posted by Jon Aston (Member # 1725) on :
Welcome back, Roger.
Keep an eye on your Canadian sales in the next 3-6 months...
Posted by Michael Clanton (Member # 2419) on :
Good to have you back! does your bum knee prevent you from driving your hot rod? If so I would be happy to look after it a while, until you heal.
I's hard to keep a good man (or the King Of RapidTac)down!
Posted by Jonathan Androsky (Member # 2806) on :
Just when you thought it was safe to apply vinyl dry! Welcome back Roger, knee problems suck.
Posted by Randy Campbell (Member # 2675) on :
Welcome back Roger.
Posted by Santo (Member # 411) on :
Welcome back, Roger. There is no need to try to catchup on what went on or inject the benefits of Rapid-Tac products into past posts. We need your full attention with current board happenings. Just funning!
Posted by John Thompson (Member # 2750) on :
About where all of these viruses are coming from, I saw a report on CNN or somehere else where some of our not so friendly non-allie countries are actually giving monetary rewards if their computer savvy citizens create a virus for them just to disrupt our daily activities in this country. I guess they figure that it'll make us mad, like we aren't already.
Posted by Bob Bond (Member # 26) on :
Welcome back Roger, we're glad to see you here again.
Posted by Dave Grundy (Member # 103) on :
Jon Aston...Does this mean that I will be able to buy Rapid Prep through the London branch of ND Graphics or will I just continue to buy it from Canadaian SignCrafters???
Also...How can I get a small sample of Avery A3911-R??? (like 3" or 6" of 15" material) I know it runs about $300+ for a 10 yd roll of 15" but I don't want to spend that amount without having seen something more than the sammple book swatch.
Any help will be GREATLY appreciated! Posted by Ken Henry (Member # 598) on :
I've gotta agree with Dave Grundy here...ND Graphics in London has NEVER has Rapid Prep in stock whenever I've gone there. You can't sell any product if the shelf is bare!
PS, You can confirm with Bob Mann, that I'm in there fairly regularly.
Posted by roger bailey (Member # 556) on :
Thanks for the "welcome back" guys(& gals)!!
I have been pulling my hair out over this virus thing!!
I will start a new thread with a question and possible answer about these things!
Roger Posted by Si Allen (Member # 420) on :
Hey Roger....before you wind up with my hairline...update your anti-virus program REGULARLY!!!! If you don't...one will get ya...ask me how I know
There are new virii and worms comming out all the time! And Klez is real cute...if it infects you (by not updating), it disables your anti-virus program!
By the way...welcome back...and get to work on an anti-virus spray! Posted by Stephen Deveau (Member # 1305) on :
Dave,Ken....
Give (Jon) a new Bald Spot on his Head, so he can grow somemore on his "Chinny Chin Chin!"
(ND Graphics) will send you all you need if your order from them (Direct out of Toronto.)
I'am lucky enough to have a branch here with great people for the surplus. Posted by Glenn Taylor (Member # 162) on :
Glad to see you back, Roger! Posted by J & N Signs (Member # 901) on :
Hey Dave; What's wrong with continuing with Canadian Signcrafters? Just asking!
Posted by Dave Grundy (Member # 103) on :
ABSOLUTELY NOTHING Mario!!!!!! I think Pete and Marge are great folks! It is just closer for me to drive to London than to Bayfield. Shipping to anywhere costs money and that adds to the costs of the product.
ALSO it was kinda my way of trying to wake ND Graphics up to the fact that there are products out there on the market that they seem to refuse to carry but others do, and they are products that we folks want. I have asked, on several occasions, why ND doesn't carry Rapid Prep and the answer is.."We don't know what it is, Toronto doesn't have it listed"
As a side comment..I was talking to my buddy Fred Floyd in Wilmington North Carolina this afternoon..He has offered to send me any samples of anything, in any catalogue that I have. THAT is a LOT more than ND Graphics seems willing to do, and they are just down the road from me.
DON'T get me wrong..I like dealing with ND Graphics..it is just that they seem so behind the times..
I WOULD deal exclusively with Pete and Marge if it were practical..but I can't drive to Bayfield every time I need a particlar item..and when I need it..I need it NOW..not tomorrow via UPS.
I still buy all my SignGold thru Pete and Marge..WHY??? THEY stock it!!! ND Graphics in London doesn't.
![[Mad]](mad.gif)
![[Roll Eyes]](rolleyes.gif)
![[Wink]](wink.gif)
![[Smile]](smile.gif)
![[Razz]](tongue.gif)
![[Frown]](frown.gif)
![[Big Grin]](biggrin.gif)